Suzuki SIDEKICK 1995 Owner'S Manual Download Page 103

Page: 103 / 160

VEHICLE LOADING AND TOWING

TOWING METHOD E

FRONT WHEELS ON THE GROUND
AND REAR WHEELS ON A DOLLY.

E : 2WD VEHICLES

1) Secure the rear wheels on a towing

dolly according to the instructions pro-
vided by the dolly manufacturer.

2) Turn the ignition key to the "ACC"

position to unlock the steering wheel.

3) Make sure the front wheels are facing

straight forward and secure the steer-
ing wheel with a steering wheel clam-
ping device designed for towing.

The steering column is not strong
enough to withstand shocks transmit-
ted from the front wheels during tow-
ing. Always unlock the steering wheel
before towing.

8-12

104,

Summary of Contents for SIDEKICK 1995

































































































































































Search results

Summary of Contents for SIDEKICK 1995

Reviews:

Related manuals for SIDEKICK 1995

Brands by name

Popular brands

Suzuki SIDEKICK 1995, Owner'S Manual

Search results

Summary of Contents for SIDEKICK 1995

Reviews:

Related manuals for SIDEKICK 1995

Brands by name

Popular brands