STEERING COLUMN CONTROLS
Windshield Washer
To spray windshield washer fluid, pull
the lever toward you. The windshield
wipers will automatically turn on at low
speed if they are not already on and the
"INT" position is equipped.
To prevent windshield icing in cold
weather, turn on the defroster to
heat the windshield before and
during windshield washer use.
Do not use radiator antifreeze in
the windshield washer reservoir. It
can severely impair visibility when
sprayed on the windshield, and can
also damage your vehicle's paint.
A CAUTION
To help prevent damage to windshield
wiper and washer system com-
ponents, you should take the follow-
ing precautions:
* Do not continue to hold in the
lever when there is no windshield
washer fluid being sprayed or the
washer motor can be damaged.
* Do not attempt to remove dirt from
a dry windshield with the wipers or
you can damage the windshield
and the wiper blades. Always wet
the windshield with washer fluid
before operating the wipers.
* Clear ice or packed snow from the
wiper blades before using the
wipers.
* Check the washer fluid level re-
gularly. Check it often when the
weather is bad.
* Only fill the washer fluid reservoir
3/4 full during cold weather to
allow room for expansion if the
temperature falls low enough to
freeze the solution.
60A23-03050
TILT STEERING LOCK LEVER
(If Equipped)
3-5
The tilt steering lock lever is located on
the left side of the steering column. To ad-
just the steering wheel height:
1) Push down on the lock lever to unlock
the steering column.
2) Tilt the steering wheel to the desired
height and lock the steering column by
pulling the lock lever all the way up.
3) Try moving the steering wheel up and
down to make sure it is securely
locked in position.
Never attempt to adjust the steering
wheel height while the vehicle is mov-
ing or you could lose control of the
vehicle.
28
