OTHER CONTROLS AND EQUIPMENT
3) the end of the zipper is pushed all
the way in (as shown in the illustr-
ation above) before zipping up the
zipper.
When installing the rear window,
make sure that it is fully closed and
both corner flaps are fastened, or
exhaust gas can enter the vehicle.
Removing and Installing the Side
Window (For tuck type top)
To remove the side window:
1) Unfasten the top end and rear end
of the side window.
2) Unzip the zipper as far as it goes (to
the position .
3) Unhook the bottom end and
front end of the side w i n d o w
by pulling it down and forward.
4) Unzip the zipper fully and remove
the side window.
5-13
60
