INSPECTION AND MAINTENANCE
R: Replace or change
L: Lubricate
(For Non-California emission specification vehicles)
I: Inspect and correct or replace if necessary
NOTE:
California emission specification vehicles are
can be identified by checking the Emission
California emission specification vehicle.
NOTE:
The maintenance services indicated by are recommended maintenance items.
Item 7 (R) is applicable to the exhaust mounting rubber only.
For Canada, Item 13 is a recommended maintenance item.
9-3
108
ENGINE & EMISSION CONTROL
1. Fan (Water pump) drive belt
Tension check, 'adjustment, 'replacement
* 2. Camshaft timing belt
* 3. Valve lash (clearance)
4. Engine oil and oil filter
* 5. Cooling system hoses and connections
6. Engine coolant
* 7. Exhaust pipes and mountings
* 8. PCV valve
* 9 Heated oxygen sensor
*10. Three way catalytic converter
•11. EVAP canister
*12. Emission-related hoses & tubes
*13. EGR system
•14. ECM & associated sensors
*15. Wiring harness and connections
16. Spark plugs
•17. Distributor cap and rotor
*18. Ignition wiring
*19. Ignition timing
*20. Fuel tank cap
21. Air cleaner filter element
*22. Fuel filter
*23. Fuel lines and connections
*24. Idle speed
*25. Fuel injector
Replace at 50,000 miles (83,000 km) and 100,000 miles (166,000 km)
Replace at 80,000 miles (133,000 km)
Inspect at 100,000 miles (166,000 km)
Replace at 100,000 miles (166,000 km)
Inspect at 50.000 miles 183.000 km) and 100,000 miles (166,000 km)
Inspect at 100,000 miles (166,000 km)
Inspect at 100,000 miles (166,000 km)
Interval: This interval should be judged by
odometer reading or months, whichever
comes first.
