INSPECTION AND MAINTENANCE
Outboard
Side door
Side marker light (except for rear light of
2-door hard top model)
To remove the light housing, pull out the
outboard end (vehicle front or rear end)
of the housing while pushing the hous-
ing toward the side door.
To install the housing, push in its outboard
end, then push in the other end.
Outboard
Side door
Side marker light (for rear light of 2-door
hard top model)
Undo the screw securing the light hous-
ing to the vehicle body and remove the
housing. Undo the other screw to disas-
semble the light housing.
When installing the light housing to the
vehicle body, first insert the groove of
the housing rear end into the vehicle
body panel edge.
High-mount stop light (for Canvas top
model)
Undo the two screws and remove the
housing.
9-29
134
Rear
