INSPECTION AND MAINTENANCE
60A23-09090
WINDSHIELD WASHER FLUID
60A2309100
AIR CLEANER
4) Reinstall the reservoir and fill it with
engine coolant to the "FULL" line.
5) Tighten the drain plug on the radiator,
fill the radiator with engine coolant
and install the radiator cap.
6) After filling, let the engine idle for
about 2-3 minutes to get rid of air in
the cooling system. Then, stop the
engine.
7) Check the engine coolant level in the
radiator again. If the level has gone
down, add more engine coolant.
CAUTION
The engine coolant must be replaced
with the vehicle on level ground.
Check that there is washer fluid in the
tank. Refill it if necessary. Use a good
quality windshield washer fluid, diluted
with water as necessary.
Do not use "anti-freeze" solution in
the windshield washer reservoir. This
can severely impair visibility when
sprayed on the windshield, and also
damage your vehicle's paint.
CAUTION
Damage may result if the washer
motor is operated with no fluid in the
washer tank.
If the air cleaner is clogged with dust,
there will be greater intake resistance,
resulting in decreased power output and
increased fuel consumption.
Take off the air cleaner cover.
Remove the element from the air cleaner.
If it appears to be dirty, replace it with a
new one.
121
9-16
