INSTRUMENT PANEL
60A23-04170
AM(/FM) RADIO WITH DIGITAL
DISPLAY (If Equipped)
Display
ST indicator
Preset channel indicator
Display button
Time adjusting button
Power switch/Volume control
Tone control
Balance control
Band (AM/FM) select button
(if equipped)
up down manual tuning (also
used as seek button/minute and
hour adjusting button
Pocket
Preset button (1 to 5)
AM/FM indicator (if equipped)
Time/frequency digital display
Operation of Controls
Power Switch/Volume Control
Push the control knob to turn on the
power. Push it again to turn the power off.
Turn the knob clockwise to increase the
volume and counterclockwise to reduce
the volume.
Manual Tuning Button/Seek Tuning
Press the side of the button to tune
to a higher frequency station. Press
the side of the button to tune to a
lower frequency station. The frequency
changes by 9 KHz (AM) or 0.1 MHz (FM)
at each push of the button. If you hold
the button in, the frequency changes con-
tinuously.
If you hold one side of the manual tuning
button down for longer than half a se-
cond, seek tuning is activated. The fre-
quency increases (or decreases) and
stops automatically when a station is
received, even if you hold the button in.
Press the button again to search for
another station. If you press the button
while the radio is searching for a station,
seek tuning will be immediately canceled.
Display button
When this button is pressed, the radio
frequency is displayed for five seconds,
then the normal time display returns
automatically.
Band Select Button
Press this button to select the desired
band (AM or FM). The band being re-
ceived is indicated by the AM/FM in-
dicator. When the FM band is selected
and a stereo broadcast is being received,
the ST indicator will come on.
Preset Station Buttons
Press the button (1 to 5) to select a sta-
tion that you have preset. The frequency
corresponding to the selected preset sta-
tion appears on the digital display.
4-14
45
