BEFORE DRIVING
tighten the belt, pull more webbing
toward the retractor.
When you unbuckle the seat belt and
allow it to retract to a certain length, the
retractor will automatically revert back to
the normal ELR mode.
Installation—Child Restraint with Top
Strap
If you need to install a child restraint that
requires a top strap, follow the instruc-
tions below:
• For 4-door model:
Have your dealer install the top strap
anchor bracket for your child restraint
system or contact your dealer for in-
structions on how to install the anchor
bracket. Anchorages are located on
either side of the rear of the luggage
compartment. Once the anchor
bracket has been installed, install the
child restraint system as follows:
1) Secure the child restraint on the rear
seat using the procedure described
above for securing a restraint
system that does not require a top
strap.
2) Hook the top strap to the anchor
bracket and tighten the top strap
according to the instructions provid-
ed by the child restraint system
manufacturer. When routing the top
strap, be sure to pass it between the
head restraint and the rear seatback
as shown.
For 2-door model
If the right front passenger's seat of
your vehicle has an adjustable head
restraint, you can install a child
restraint which reguires a top strap on
the seat by following the instructions
below. If the right front passenger's
seat of your vehicle has an integrated
head restraint, there is no place in
your vehicle to install a child restraint
which reguires a top strap.
2-13
19
