OTHER CONTROLS AND EQUIPMENT
Long groove
Short groove
-- Right
Left —
Removing and Installing the Rear
Window (For tuck type top)
The rear w i n d o w of your vehicle is
removale. This allows you to access the
cargo area or to replace the window if it
becomes deteriorated. To remove the
rear window:
1) Open the rear gate fully.
2) Unfasten the canvas flaps at the
lower corners of the rear window.
3) Unzip the zipper fully.
4) Hang down the rear w i n d o w
rearward.
5) Push up the rear window frame lock
on the left end and pull the rear
window frame rearward.
6) Slide the rear window sideward to
remove it from the frame if
necessary.
To install the rear window, reverse the
procedure used to remove it. Make
sure that:
1) the long groove of the frame be in-
stalled to the right retainer first and
then the short groove be installed
to the left retainer,
2) the rear w i n d o w be positioned by
being slid right or left so the w i n -
dow fits the canvas top opening,
and
5-12
59
