STEERING COLUMN CONTROLS
60A23 03020
LIGHTING/TURN SIGNAL CONTROL
LEVER
This control lever is located on the out-
board side of the steering column. Ope-
rate the lever as described below.
Lighting Operation
To turn the lights on or off, twist the knob
on the end of the lever. There are three
positions: in the "OFF" position all lights
are off; in the middle position the front
parking lights, tail-lights, licence plate
light, and instrument lights are on, but
the headlights are off; in the third posi-
tion the headlights come on in addition
to the other lights.
With the headlights on, push the lever for-
ward to switch to the high beams or pull
the lever toward you to switch to the low
beams. When the high beams are on, a
light on the instrument panel will come
on. To momentarily activate the high
beams as a passing signal, pull the lever
slightly toward you and release it when
you have completed the signal.
Day time Running Light (D.R.L.) System
(For Canada)
The headlights light, but are dimmer than
the low beam, when the following three
conditions are all met. Also, the D.R.L. in-
dicator light on the instrument panel
comes on.
Conditions for D.R.L. system operation:
1. The engine is running.
2. The parking brake is released.
3. The lighting switch is at either the
"OFF" or the "middle" position.
NOTE:
Be sure to turn the lighting switch to the
third position at night or at any time of the
day when driving or weather conditions
require the headlights to operate at full
brightness and the taillights to be on.
Lights "On" Reminder
A buzzer/chime sounds to remind you to
turn off the lights if they are left on
when the ignition switch is turned to the
"OFF", "LOCK", or "ACCESSORY" posi-
tion.
3-3
21
