INSTRUMENT PANEL
Description of Controls
Function Lever (1) : This lever is used to
select one of the functions described be-
low.
VENTILATION 2: Temperature-
controlled air comes out of the
center and side air outlets.
BI-LEVEL 3: Temperature-con-
trolled air comes out of the floor
outlets and cooler air comes out
of the center and side outlets.
When the temperature control
lever is in the fully "COLD" posi-
tion or fully "HOT" position,
however, the air from the floor
outlets and the air from the cen-
ter and side outlets will be the
same temperature.
HEATER 4 : Temperature-con-
trolled air comes out of the floor
outlets.
HEATER & DEFROST 5: Tem-
perature-controlled air comes
out of the floor outlets, the wind-
shield defroster outlets, and the
side defroster outlets.
DEFROST 6 : Temperature-con-
trolled air comes out of the wind-
shield defroster outlets and the
side defroster outlets.
Air Intake Lever 7: This lever is used to
select between circulating outside air
(FRESH AIR) or recirculating inside air
(RECIRCULATEDAIR).
Temperature Control Lever 8: This lever
is used to control the temperature of the
air that comes out of the air outlets.
Fan Lever 9 : This lever is used to turn
on the fan and to select fan speed. There
are five positions: OFF, LOW, MEDIUM,
MEDIUM HIGH, and HIGH.
System Operating Instructions
Natural Ventilation
Move the function lever to "VENTILA-
TION", the air intake lever to "FRESH
AIR", the temperature control lever to the
desired temperature position, and the fan
lever to "OFF". Fresh air will flow through
the vehicle during driving.
Forced Ventilation
The lever settings are the same as for
natural ventilation except you move the
fan lever to a position other that "OFF".
Normal Heating (Using outside air)
Move the function lever to "HEATER", the
air intake lever to "FRESH AIR", the tem-
perature control lever to the desired tem-
perature position, and the fan lever to the
desired fan speed position. Moving the
fan lever to a higher fan speed position
increases heating efficiency.
Quick Heating (Using recirculated air)
The lever settings are the same as for
normal heating except you move the air
intake lever to "RECIRCULATED AIR". If
you use this heating method for an ex-
tended period of time, the air in the vehi-
cle can become contaminated and the
windows can become cloudy. Therefore,
use this method only for quick heating
and change to the normal heating method
as soon as possible.
4-11
