OTHER CONTROLS AND EQUIPMENT
2) Pull up the lock knob on the top of
each split seat or pull up both lock
knobs on the top of a one-piece seat,
and fold the seatback(s) forward.
3) Pull up the lever on the rear inboard
side of each split seat in the 2-door
model or pull the center ring at the rear
of other seats, and fold the seat(s)
forward.
4) (For 2-door model)
Unhook the support rod from the bot-
tom of the seat(s) and attach it (them)
to the latch ring(s) on the floor of the
vehicle.
(For 4-door model)
Hook the strap on the right side of the
5-7
NOTE:
If the front seats hinder movement of
the rear seat, slide the front seats
forward.
To return the seat(s) to the normal posi-
tion, reverse the procedure used to fold
the seat(s) forward. After returning the
seat(s) to the normal position, try mov-
ing the seat and seatback to make sure
they are securely latched.
When returning a rear seat to the
normal position, make sure that move-
ment of the seat is unobstructed and
the seat and seatback are securely
latched. If the seat is not securely
latched, the seat belt will not provide
(Continued)
(Continued)
the protection for which it was de-
signed, failure to securely latch the
seat may result in severe personal
injury.
Luggage or other cargo should be
stowed in the luggage compartment
with the rear seat in an upright posi-
tion, whenever possible. If you need
to carry cargo in the passenger com-
partment with the rear seat back fold-
ed forward, be sure to secure the
cargo or it may be thrown about,
causing injury. Never pile cargo higher
than the seatbacks.
