1D-25 Engine Mechanical:
• Install the engine mounting plates (1).
• Insert the two mounting bolts from left side, and
tighten their nuts.
NOTE
The engine mounting nuts are self-locking.
Once the nuts have been removed, they are
no longer of any use.
• Install the frame down tube (2).
• Tighten the bolts and nuts to the specified torque.
NOTE
The frame down tube nuts are self-locking.
Once the nuts have been removed, they are
no longer of any use.
Tightening torque
Frame down tube bolt (a): 50 N·m (5.0 kgf-m, 36.0
lbf-ft)
• Tighten all engine mounting bolts and nuts to the
specified torque, as shown in the following illustration.
1
I940H1140365-01
(a)
(a)
2
I940H1140366-01
(a)
I940H1140367-01
LH
RH
LH
RH
LH
RH
3 “ a ”
(b)
(b)
(b)
5 “ a ”
4 “ b ”
I940H1140313-03
3. Engine mounting bolt (Front)
“a”: 215 mm (8.5 in)
4. Engine mounting bolt (Rear lower)
“b”: 195 mm (7.7 in)
5. Engine mounting bolt (Rear upper)
: 55 N
⋅
m (5.5 kgf-m, 40.0 lbf-ft)
Summary of Contents for Intruder VZ1500
