Suzuki Intruder VZ1500, Service Manual

Page: 460 / 580

4A-14 Brake Control System and Diagnosis:
3) Remove the union bolt (2).
4) Disconnect the rear reservoir tank hose (3).
5) Remove the footrest bracket bolts (4).
6) Loosen the lock-nut (5) and remove the push rod (6).
7) Remove the rear master cylinder (7) by removing the
mounting bolts (8).
8) Remove the reservoir (9) along with reservoir hose
(10).
Installation
Install the rear brake master cylinder in the reverse order
of removal. Pay attention to the following points:
• Install the reservoir hose (1) to the clamp (2).
• Install the master cylinder (3) and tighten the master
cylinder mounting bolts (4) to the specified torque.
Tightening torque
Rear brake master cylinder mounting bolt (a): 10
N·m (1.0 kgf-m, 7.0 lbf-ft)
3
2
I940H1410058-02
4
I940H1410059-02
5
6
7
8
I940H1410061-03
9
10
I940H1410062-03
1
2
I940H1410064-02
3
(a)
4
I940H1410066-03