Suzuki Intruder VZ1500, Service Manual

Page: 550 / 580

9B-4 Lighting Systems:
3) Replace the headlight bulb (3) by unhooking the bulb
holder spring (4).
4) Install the headlight assembly and headlight cover.
Refer to “Headlight Removal and Installation
(Page 9B-2)”.
Headlight Beam Adjustment
B940H29206005
1) Insert hexagon wrench as shown in the figure and
adjust the headlight beam vertically.
2) Adjust the headlight beam horizontally with a
hexagon wrench.
Headlight Relay Inspection
B940H29206006
Inspect the headlight relay in the following procedures:
1) Remove the front seat. Refer to “Exterior Parts
Removal and Installation in Section 9D (Page 9D-
5)”.
2) Remove the headlight relay (1).
3) First, check for continuity with the tester between
terminals “A” and “B”. Next, check for continuity
between “A” and “B” with 12 V voltage applied,
positive (+) to terminal “C” and negative (–) to
terminal “D”. If the continuity is found when 12 V is
applied, replace the relay with a new one.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity test (
)
3
4
I940H1920006-01
I940H1920007-02
I940H1920008-01
1
I940H1920009-01
“A”
“B”
“C”
“D”
I718H1170013-01