Supero FatTwin F627R3-R72B+, User Manual

Page: 132 / 152

7-20
FatTwin F627R3-RTB+/R72B+ FatTwin
Device Mode
Use this feature to select the desired mode for a serial port specifi ed. The options
are Normal and High Speed.
Serial Port 2 Attribute
Use this feature to select the attribute for this serial port. The options are SOL
(Serial Over LAN), and COM.

Serial Port Console Redirection
COM, SOL
These two submenus allow the user to confi gure the following Console Redirection
settings for a COM Port specifi ed by the user.
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and Disabled. The default setting for COM is Disabled .
The default setting for SOL is Enabled .

Console Redirection Settings
This feature allows the user to specify how the host computer will exchange
data with the client computer, which is the remote computer used by the user.
Terminal Type
This feature allows the user to select the target terminal emulation type for
Console Redirection. Select VT100 to use the ASCII Character set. Select
VT100+ to add color and function key support. Select ANSI to use the Extended
ASCII Character Set. Select VT-UTF8 to use UTF8 encoding to map Unicode
characters into one or more bytes. The options are VT100, VT100+ , VT-UTF8,
and ANSI.
Bits Per second
Use this feature to set the transmission speed for a serial port used in Console
Redirection. Make sure that the same speed is used in the host computer and the
client computer. A lower transmission speed may be required for long and busy
lines. The options are 9600, 19200, 38400, 57600 and 115200 (bits per second).
Data Bits
Use this feature to set the data transmission size for Console Redirection. The
options are 7 Bits and 8 Bits .