Supero FatTwin F627R3-R72B+, User Manual

Page: 130 / 152

7-18
FatTwin F627R3-RTB+/R72B+ FatTwin
ASPM Support
This feature allows the user to set the Active State Power Management (ASPM)
level for a PCI-E device. Select Force L0s to force all PCI-E links to operate at L0s
state. Select Auto to allow the system BIOS to automatically set the ASPM level for
the system. Select Disabled to disable ASPM support. The options are Disabled,
Force L0s, and Auto .
Warning : Enabling ASPM support may cause some PCI-E devices to fail!
SXB1 PCI-E 3.0 x16 OPROM, SXB2 PCI-E 3.0 x8 OPROM, SXB3 PCI-E 3.0 x8
OPROM
Select Enabled to enable Option ROM support to boot the computer using a device
installed on the slot specifi ed above. The options are Enabled and Disabled.
Onboard LAN Option ROM Select
Select iSCSI to use the iSCSI Option ROM to boot the computer using a network
device. Select PXE (Preboot Execution Environment) to use an PXE Option ROM
to boot the computer using a network device. The options are PXE and iSCSI.
Load Onboard LAN 1 Option ROM, Load Onboard LAN 2 Option ROM
Select Enabled to enable the onboard LAN 1 or LAN 2 Option ROM. This is to
boot the computer using a network device. The default setting for both LAN1/LAN2
Option ROM is Disabled .
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are Onboard , and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unifi ed
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled .

Super IO Confi guration
Super IO Chip
This item displays the Super IO chip used in the motherboard.