Supero FatTwin F627R3-R72B+ User Manual Download Page 136

Page: 136 / 152

7-24

FatTwin F627R3-RTB+/R72B+ FatTwin

Current Status Information

This item displays the information regarding the current TPM status.

TPM Enable Status

This item displays the status of TPM Support to indicate if TPM is currently

enabled or disabled.

TPM Active Status

This item displays the status of TPM Support to indicate if TPM is currently

active or deactivated.

TPM Owner Status

This item displays the status of TPM Ownership.



Intel TXT (LT-SX) Confi guration

Intel TXT (LT-SX) Hardware Support

This feature indicates if the following hardware components support the Intel

Trusted Execution Technology.

CPU

: TXT (Trusted Execution Technology) Feature

Chipset

: TXT (Trusted Execution Technology) Feature

Intel TXT (LT-SX) Confi guration

This feature displays the following TXT confi guration setting.

TXT (LT-SX) Support

This item indicates if the Intel TXT support is enabled or disabled. The default

setting is

Disabled

Intel TXT (LT-SX) Dependencies

This feature displays the features that need to be enabled for the Intel Trusted

Execution Technology to work properly in the system.

VT-d Support

: Intel Virtualization Technology with Direct I/O support

VT Support

: Intel Virtualization Technology support

TPM Support

: Trusted Platform support

TPM State

: Trusted Platform state

Summary of Contents for FatTwin F627R3-R72B+

























































































































































Search results

Summary of Contents for FatTwin F627R3-R72B+

Reviews:

Related manuals for FatTwin F627R3-R72B+

Brands by name

Popular brands

Supero FatTwin F627R3-R72B+, User Manual

Search results

Summary of Contents for FatTwin F627R3-R72B+

Reviews:

Related manuals for FatTwin F627R3-R72B+

Brands by name

Popular brands