Supero FatTwin F627R3-R72B+, User Manual

Page: 71 / 152

Chapter 5: Advanced Motherboard Setup
5-17
5-7 Connector Defi nitions
PWM to Fans/PWR Good to PWR
Adaptor Card
P o w e r m a n a g e m e n t f o r t h e f a n s
connected to the backplane, and power
regulation signals for 12V, 5V, 3.3V
on the backplane power adaptor card
(P/N: BPN_ADP_F418) are located on
pins 7 and 8 of JF1. Refer to the table
on the right for pin defi nitions.
Fan Speed Signals
Fan Speed Signals for Fan 1 and Fan 2
are located on pins 5 and 6 of JF1. Attach
a cable to pin 5 or pin 6 of JF1 to indicate
the speed of Fan 1 or Fan 2. Refer to
the table on the right for pin defi nitions.
Fan Speed Signals
Pin Defi nitions (JF1)
Pin# Defi nition
5 Fan Speed Signal 1
6 Fan Speed Signal 2
PWR Management /PWR GOOD
Pin Defi nitions (JF1)
Pin# Defi nition
7 PWM for Fans to Backplane
8 (12V, 5V, 3.3V) PWR Good for
PWR Adaptor Card
(BPN_ADP_F418)
UID Button/LAN LED Signal
UID Button and LAN LED signal
connections are located on pins 3 and 4
of JF1. Refer to the table on the right for
pin defi nitions.
UID Button/LAN LED
Pin Defi nitions (JF1)
Pin# Defi nition
3 UID Button
4 LAN LED Signal
Power Button
The Power Button connection is located
on pins 1 and 2 of JF1. Momentarily
contacting both pins will power on/off
the system. This button can also be
configured to function as a suspend
button (with a setting in BIOS - See
Chapter 4). To turn off the power when
the system is in suspend mode, press
the button for 4 seconds or longer. Refer
to the table on the right for pin defi nitions.
Power Button
Pin Defi nitions (JF1)
Pin# Defi nition
1 Signal
2 Ground