Supero FatTwin F627R3-R72B+, User Manual

Page: 91 / 152

Chapter 6: Advanced Chassis Setup
6-7
The drives are mounted in drive carriers to simplify their installation and removal
from the chassis. These carriers also help promote proper airfl ow for the drive bays.
Removing the Dummy Drive from the 3.5" Drive Carrier
1. Remove the hard drive carrier from the chassis as described in the previous
section and lay the drive carrier on a fl at surface.
2. Remove the two screws securing the dummy drive to the drive carrier.
3. Lift the dummy drive from the drive carrier.
Figure 6-5: Removing a Dummy Drive from the 3.5" Drive Carrier
(Your drives may differ from the one shown in this illustration)
Drive Carrier
Dummy Drive
1
2
1
2
Warning: Except for short periods of time while swapping hard drives, do not
operate the server with the hard drives bays empty.