Supero FatTwin F627R3-R72B+, User Manual

Page: 69 / 152

Chapter 5: Advanced Motherboard Setup
5-15
Notes:
1. For the latest CPU/Memory updates, please refer to our website at http://
www.supermicro.com/products/motherboard/ for details.
2. Use only the correct type of onboard CMOS battery as specifi ed by the
manufacturer. Do not install the onboard battery upside down to avoid
possible explosion.
3. Jumpers not indicated are for test purposes only.
4. All graphics shown in this manual were based upon the latest PCB Revision
available at the time of publishing of the manual. The motherboard you've
received may or may not look exactly the same as the graphics shown in this
manual.
X9DRFR Quick Reference
Jumper Description Default Setting
JBT1 Clear CMOS See Section 5-9
JBRST1 BMC (BaseBoard Controller) Reset Off (Normal)
JI
2
C1/JI
2
C2 SMB to PCI-E Slots Off (Disabled)
JPB1 BMC Enabled Pins 1-2 (Enabled)
JPG1 VGA Enabled Pins 1-2 (Enabled)
JPL1 LAN1/LAN2 Enable Pins 1-2 (Enabled)
JWD1 Watch Dog Timer Enable Pins 1-2 (Reset)
LED Description State Status
LE1 Onboard PWR LED Green: On Onboard Power On
LE3 SATA Activity LED Green: Blinking SATA Active
LED1 UID LED Blue: On Unit Identifi ed
LEM1 BMC Heartbeat LED
Green: Blinking
Green: Steady On BMC Normal
BMC Disabled or Failed