Supero FatTwin F627R3-R72B+, User Manual

Page: 72 / 152

5-18
FatTwin F627R3-RTB+/R72B+ User's Manual
SMBUS for Hot Swap Circuit on
PWR Adaptor Card & PS Failure
System Management Bus for the Hot
Swap Circuit on the Power Adaptor
Card (P/N: BPN_ADP_F418) and Power
Failure connections are located on pins
15 and 16 of JF1. Refer to the table on
the right for pin defi nitions.
SMBUS for Hot Swap Circuit on
PWR Adaptor Card
System Management Bus for the Hot
Swap Circuit on the Power Adaptor Card
(P/N: BPN_ADP_F418) is located on
pins 15 and 16 of JF1. Refer to the table
on the right for pin defi nitions.
SMBus for Hot Swap Circuit
on PWR Adaptor Card
Pin Defi nitions (JF1)
Pin# Defi nition
15 SMBUS Data for Hot Swap
Circuit for PWR Adaptor Card
16 SMBUS Alert for Hot Swap
Circuit for PWR Adaptor Card
SMBus for Hot Swap Circuit &
PS Failure Pin Defi nitions (JF1)
Pin# Defi nition
13 SMBUS Clock for Hot Swap
Circuit on PWR Adaptor Card
14 Power Supply Failure
UID LED/Red LED Indicators
Connections for UID (Unit Identifi er) LED
and Red LED, which indicates system
overheat or fan failure, are located on
pins 11 and 12 of JF1. Refer to the table
on the right for pin defi nitions.
UID LED/Red LED
Pin Defi nitions (JF1)
Pin# Defi nition
11 UID LED
12 Red LED (for OH/
Fan Fail)
Red LED (OH/Fan
Fail) Status
State Defi nition
Off Normal
On Overheat
Flashing Fan Fail
Front Panel Power On LED
Connect an LED Cable to pins 9 and
10 of JF1 to indicate if onboard power
is on. Refer to the table on the right for
pin defi nitions.
FP PWR On LED
Pin Defi nitions (JF1)
Pin# Defi nition
9 Front Panel PWR LED
10 PS_ON_N to PS (Turn On PS)