Supero FatTwin F627R3-R72B+, User Manual

Page: 11 / 152

Chapter 1
Introduction
1-1 Overview
The FatTwin F627R3-RTB+/R72B+ is a high-end server comprised of two main
subsystems: the SCF424AS-R1K28B 4U server chassis and the X9DRFR dual
processor serverboard in four hot-swap nodes. Please refer to our web site for
information on operating systems that have been certifi ed for use with the system
( www.supermicro.com ).
In addition to the serverboard and chassis, various hardware components have been
included with the FatTwin F627R3-RTB+/R72B+ server, as listed below:
•
Heat Sinks
Four (4) 2U passive CPU heat sinks for rear CPU (SNK-P0048P)
Four (4) 2U passive CPU heat sinks for front CPU (SNK-P0048PS)
•
Four (4) Plastic air shrouds (MCP-310-42401-0B)
•
Eight (8) 80x80x38-mm chassis middle cooling fans (FAN-0129L4)
•
Four (4) Round 20" 20-to-20-pin ribbon front control cables (CBL-0047L)
•
Four (4) 4-pin 40-cm PDB-to-MB HF power cables (CBL-0480L)
•
SAS/SATA Backplane:
Four (4) Backplanes for two (2) 3.5" HDD (BPN-SAS-F424-A2)
Four (4) Backplanes for six (6) 3.5" HDD (BPN-SAS-F424-A6)
Eight (8) 29cm 30AWG SATA cables (CBL-0483L)
Thirty-two (32) hot-swap 3.5" HDD trays (MCP-220-00094-0B)
F627R3-RTB+ only:
Eight (8) 27-cm PBF cables for SGPIO (CBL-0157L-02)
Twelve (12) 81-cm SATA 30AWG cables (CBL-0481L)
Twelve (12) 55-cm 30AWG SATA-SATA cables (CBL-0484L)
F627R3-R72B+ only:
Four (4) SAS add-on cards (BPN-ADP-S2208L-H8IR-O-P)
Four (4) 23-cm, w/25.5-cm 30AWG Ipass-to-4 SATA cables (CBL-0118L-03)
Eight (8) 43-cm SATA round S-RA PBF cables (CBL-0226L)
Four (4) 27-cm PBF cables for SGPIO (CBL-0157L-02)
•
One (1) F418/F424 Rail set (MCP-290-41803-0N)
Chapter 1: Introduction
1-1