NVR Software - SeeTec client
47
4.1.7
Change SeeTec Installation
If you have installed multiple independent SeeTec servers, then you can connect to
another SeeTec server:
1. Select
Change SeeTec Installation
in the
File
menu.
2. In the
Computer name
field, enter the computer name or the IP address of
the SeeTec server.
3. Enter the port of the SeeTec server in the
Port
field (default: 60000).
Note
Connection to another SeeTec server is not possible if you are in
Configuration Mode
!
To setup connection to multiple installations simultaneously, see
chapter
Add SeeTec Installation
(page 47).
4.1.8
Add SeeTec Installation
You can setup connections to multiple SeeTec Installations by clicking on
Add
SeeTec Installation
to access multiple SeeTec Installations simultaneously
(= SeeTec Multi Installation Login).
Assumptions
The same SeeTec version must be installed on all servers to be connected.
Each server must support SeeTec Multi Installation Login. You must have a
license for SeeTec Multi Installation Login.
Limitations
The following functions are not available when multiple servers are connected:
In
File
menu:
Change user
,
Change profile
,
Change SeeTec
Installation
,
Change password
Multiple image data export in
Archive Mode
(available also in
Configuration Mode
)
Joystick buttons: Joystick can only be used as PTZ control device.
In menu
File
>
Client configuration
:
Automatically connect to backup
server on network failure
,
Alarm suppression
