NVR Software - SeeTec Surveillance
76
Important
MPEG-4 / H.264 streaming is manufacturer-specific and is not
supported by all cameras.
The frame rate is not indicated on Panasonic cameras. To limit the
image stream, change the bandwidth setting in
Camera
configuration
>
Image storage
.
For a client side display of MPEG / H.264 streaming, the screen
saver must be disabled.
Always keep the video card drivers updated that are installed on the
client.
If the alarm recording values specified for
Resolution
,
Compression
,
I-Frame distance
or
Bandwidth
are different from
those of standard recording, then videostreaming must be re-
started. This can lead to a recording outage of at least one I-Frame
distance.
Video profiles (multi-streaming enabled)
When you enable multi-streaming, the
Video settings
menu is automatically
renamed to
Video profiles
.
Note
To disable multi-streaming, delete all profiles except the default
profile. With a request during the deletion of the last profile, you can
restore the video setting layer.
1. Click on the
New
button to create a new video profile.
2. Click on the
Edit
button to edit a video profile.
3. Click on the
Delete
button to delete a video profile.
The number of profiles depends on the number of image streams that the camera
can transfer simultaneously.
Different profiles are used mostly for MPEG-4/H.264 streaming. For example, you
can request a high quality image stream for recording and a low quality stream for
live view on the client that has a connection with narrow bandwidth to the SeeTec
server.
