NVR Software - SeeTec Surveillance
127
Important
SeeTec takes no responsibility for completeness of the templates.
Tip
You can also create individual templates, but these must match the
form of SeeTec templates.
SMTP server
To ensure that the SeeTec services can report faulty operation or failure of a
camera, the software requires data of an accessible SMTP server.
1. Enter the data of your SMTP server in the
SMTP address
,
SMTP port
,
User
name
, and
Password
fields.
2. Optional: In the
Encryption method
dropdown list, select the encryption
method: either SSL or TLS.
3. You can use the
Send test e-mail
button to test all specified data.
Note
The test e-mail is sent to the e-mail addresses that are saved under
System Management
>
E-Mail-Management
>
System
addresses
.
E-mail Management
In the
General
dialog, you can add several e-mail lists. In the lists, you can enter
several e-mail addresses.
1. Enter the desired e-mail address in the e-mail list.
2. Click on
Add
.
3. Repeat this step for all desired e-mail addresses.
4. To delete an e-mail address, select it and click on
Remove
.
The e-mail lists can be used under
Event Management
>
System events
to send
system notifications, see chapter
SNMP server
(page 128).
By default, system notifications are sent to all e-mail addresses defined in the
System addresses
. These e-mail addresses are also used for sending the report,
see chapter
SNMP server
(page 128).
