NVR Software - SeeTec Surveillance
108
Timeout for prioritized PTZ actions
1. In
Surveillance Mode
, press F8 to enable prioritized camera control.
All cameras assigned to a user can only be controlled by that particular user. If no
control is performed, camera control is released after
Timeout
.
Prioritized camera control is only valid for those cameras that are currently
displayed. If you switch to another layer, prioritization of cameras that are no
longer shown is canceled. In addition, those cameras now shown are prioritized.
2. Press F9 to enable camera control before timeout.
Note
The user must be assigned the right to use prioritization in
Authorization Management
.
Assigning layers / patrols
The
Profile
can be used to specify which layers will be available to the user or
group profile created and which patrols may be executed.
1. To do so, click on
Edit
and assign the respective layer or the respective
patrol.
Image settings
Video classifications
Video classifications are required only if
Multi-streaming
is enabled in
Camera
configuration
.
1. Select the video profile that will be used for display on the client. You can
use different frame rates and resolutions for the
Normal
,
Selected
and
Alarm
modes.
If no profile is selected, the default profile is used automatically. The default profile
is selected in the
Camera configuration
.
Single frame (Motion JPEG / MxPEG streaming)
The option
Single image (Motion JPEG, MxPEG)
is used to specify the number of
frames per second that the client will display on each camera if the camera delivers
Motion JPEG images. There are three modes:
Normal
(camera framed in gray)
Selected
(camera framed in green)
Alarm
(camera framed in red)
