NVR Software - SeeTec Surveillance
130
5.2.14
Event Management
In the
Event Management
tab, you can purge the event database and configure
the settings for sending e-mails when system events occur.
Tip
You will find these events also on Microsoft
®
Windows
®
operating
systems in the Events display in application protocol.
General
Remove events that are no longer required from the event database to maintain
quick searches for events. This may be necessary for events for which there is no
longer any image data available. Databases that are purged with this method
deliver higher performance rates during search operations.
Automatic database purge
1. Select the
Use automatic deletion
checkbox.
2. Specify the time range after which events are to be deleted from the
database.
Note
The accesses to video sources in Surveillance Mode are saved in the
respective CameraManagement. See the configuration of the
CameraManagement service in chapter
Server
(page 132).
Manual database purge
1. Click on
Delete events
to delete all events.
2. If you do not want to purge the entire database, you can also just delete
events older than a specific point in time by selecting
Delete events older
than
.
Important
On account of legal guidelines in France, various events are never
deleted at installations in this country.
Ensure that the management database (MaxDB) has adequate
memory, see chapter
Configure management database (MaxDB)
(page 167).
