NVR Software - SeeTec Surveillance
88
Tampering
For camera models that support this feature, you can activate or deactivate the
notifications in case of
Tampering
or VideoLoss by clicking on Tampering.
You can use the notification to start an alarm scenario or to send an e-mail.
Furthermore, an entry will be made in the Windows
®
application protocol.
Note
If you disable the
Send notification in case of tampering
or
Send notification in case of video loss
checkboxes, no
notifications will be sent in case of tampering or video loss. The
alarm scenario that is triggered by the tampering or video loss will
be disabled.
Video gateway / Multicast
1. If an intelligent image evaluation is executed by a via:sys box from viasys |
Intelligent Video GmbH, enable the
Video gateway
and specify the
Port
.
Through this port, camera images are forwarded from the SeeTec server to the
via:sys box.
1. Select the
Activated
checkbox to enable multicast streaming.
2. Specify the desired multicast
IP address
and the
Port
, if the image has to
be delivered via multicast to the client.
3. Enter the TTL value for multicast.
Privacy masking
Mask sensitive areas or movements in the image to prevent users from viewing
these areas. Masking is displayed depending on the user rights in
Surveillance
Mode
and
Archive Mode
.
Important
MOBOTIX cameras are supported only for Motion JPEG streaming.
1. Select
Activated
for privacy masking.
2. Select a
Method
from the privacy masking parameters.
