NVR Software - Installation
30
IPv6 addresses are currently not supported.
7. In the
Default zone
dialog, click on
Configure zone
.
8. In the
Path
field, select a path for the MultimediaDatabase (database for
image recording).
The default path for the MultimediaDatabase is: [SeeTec installation
directory]/re/md/mds/data.
9. Enter the size of the MultimediaDatabase in the
Maximum size [GB]
field.
10. If the zone is stored on a network drive, enter the complete UNC path.
11. If the network drive is protected by a user name and password, enter the
user name and password for accessing the drive under
Network
authorization
.
Note
Ensure that the user must be available on the local machine and the
domain and user name must be specified.
After the installation, you can create additional zones in the SeeTec Administration,
see chapter
Configure MultimediaDatabase
(page 170).
12. Optional: Configure the Windows
®
firewall for MPEG-4 usage.
13. Click on
Install
to start the installation.
Note
For this type of installation, both installed services will
not
be
started automatically. You must start these services in the Control
Panel under Administrative Tools > Services or reboot your
computer.
For both servers to communicate and images to be displayed, a
continuous connection with an adequate bandwidth is necessary
between the main server and the distributed servers. The required
bandwidth depends on the image data that is to be transferred.
Additionally, a bandwidth of 64 kbit/s is required for server
communication.
