NVR Software - SeeTec Surveillance
128
In addition, you can specify
Alarm addresses
. You can select these alarm
addresses in the
E-mail and FTP
dialog.
SNMP server
You can use SNMP traps for system error reporting.
1. Enter the ManagementHost.
2. Change the values for ManagementHostTrapListenPort, LocalTrapSendPort
and CommunityString in accordance to the settings required for your SNMP
server.
3. Click on
Send test SNMP message
to test the data specified.
Select the events on which you want to receive SNMP message under
Event
Management
>
System events
, see chapter
NAT list
(page 129). By default, all
events are selected for dispatch of SNMP messages.
Important
If the SNMP (Simple Network Management Protocol) component is
installed under Control panel > Software > Add/Remove Windows
Components > Management and Monitoring Tools, then another
port must be entered for LocalTrapSendPort.
The default port is 161, which will not work in this case.
