NVR Software - SeeTec Surveillance
121
If problems occur in the copied alarm scenario, an error report will be displayed. An
error report will be displayed, for instance, if different settings have been specified
for the original alarm scenario (= source alarm scenario) and the copied alarm
scenario (= target alarm scenario).
11. Adapt the alarm scenarios for which an error report is displayed.
5.2.10
Buttons
You can use
buttons
to start actions such as camera recordings, alarm scenarios or
to open doors.
Create button
1. To create a button, click on
New
.
2. Specify a name.
3. To change the button settings, click on
Edit
.
Defining general settings for buttons
Under
General
, you can change the name of the Button in the
Name
field, and its
icon in the
Icon
dropdown list.
In Surveillance Mode,
Buttons
are listed in alphabetical order in the Buttons pane.
To use a different sorting, select the desired position of the Button in the
Use
custom sorting
dialog.
1. To assign a hot key to the Button, activate the option
Use hot key (enter
in the field below)
and enter your shortcut. The following keys and
combinations of keys are already under use by SeeTec and may not be used:
ESC, F1, F8, F9, F11, F12, CTRL+ 0, 1, 2, 3, 4, 7, 8, 9, S, O.
2. If you select the
Button is assigned to a camera
option, the button is
shown only if you have previously selected the respective camera.
Selecting actions for Button
You can use
buttons
to start actions such as camera recordings, alarm scenarios or
to open doors.
Create button
1. To create a button, click on
New
.
2. Specify a name.
3. To change the button settings, click on
Edit
.
