![SUPERLOLUX XMS-TYPH-R4-XX User Manual Download Page 133](http://html1.mh-extra.com/html/superlolux/xms-typh-r4-xx/xms-typh-r4-xx_user-manual_1403311133.webp)
NVR Software - SeeTec Surveillance
131
System events
To react flexibly to different system events, you can send different messages to
different recipients and/or via SNMP.
1. Select the time for the daily report.
The e-mail with the report of all events that occurred during the last 24 hours will
be sent to all e-mail addresses you have specified in the
E-mail management
dialog under
System addresses
.
The e-mail with the respective event is sent immediately when the event occurs. To
reduce e-mail traffic to a minimum, the e-mail service is equipped with flood
protection. The flood protection function ensures that e-mails are not sent
continuously but only after the time range you have specified in the
Dead time (s)
field.
2. Select the
E-mail recipient
to which the e-mail is to be sent.
You can create the e-mail lists in the
E-mail management
.
3. Optional: Enable
In report only
to send the event only in the report e-mail
at the specified time. Click on the
Select all
button below the table to select
all events for report sending.
4. Optional: Enable
SNMP
to send the event to an SNMP server. Click on the
Select all
button below the table to select all events for sending via SNMP.
You can configure the SNMP server under
System Management
>
SNMP server
.
5. Optional: If you want the event to be displayed in
Surveillance Mode
as
well, select the respective user or group in the
Display in client
field.
The results will be given in the
System events
field, see chapter
Layer menu
(page 50).
6. Optional: In the
Action
column in the row of an event, click on the
Edit
button to trigger an action when this event occurs. You can only select one
action per event. Click on the
OK
button to confirm the selection. Click on
the
Edit all
button below the table to select the same action for every event.