STW TC1 User Manual Download Page 296

Page: 296 / 374

8 Development Tools

User Manual

296/374

8.3.2

Windows

8.3.2.1

Install the Toolchain

This chapter provides a step by step tutorial to install the toolchain on a 32-/64-Bit Windows 7 System.

1. Download the toolchain installer from the STW FTP server:

URL: ftp://stw-connectivity.net/ (see ftp://stw-connectivity.net/ -

ftp://stw-connectivity.net/

) ESX-

TC1/DeploymentPackage_vX_XXrX/devkit_vX_XXrX/toolchain/windows/gcc_4_4_3/:

2. Download the add-on installer from STW FTP server

URL: ftp://stw-connectivity.net/ (see ftp://stw-connectivity.net/ -

ftp://stw-connectivity.net/

) ESX-

TC1/DeploymentPackage_vX_XXrX/devkit_vX_XXrX/toolchain/windows/gcc_4_4_3_Add-ons/:

3. Execute the installer

4. Execute the toolchain installer (Setup.exe binary) and follow the instructions on the screen.

5. Execute next the add-on installer (Setup.exe binary) and follow the instructions on the screen.

Summary of Contents for TC1























































































































































































































































































































































































Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands

STW TC1, User Manual

Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands