STW TC1, User Manual

Page: 215 / 374

7 Teleservice Application Framework
User Manual 215/374
7.3.6.3 Static mode
7.3.6.3.1 Basic DLC file structure
Every datalogger configuration file has the following basic components:
Necessary DLC file objects
Parameter Description
[JOBOPTIONS] Start tag of the DLC file
ACTIVE Active flag will be automatically set to 1 by ylogd after correct file parsing
LFJNAME Name of the log file job
LFFORMAT Format of the data logger file:
1 : ASCII_STD
2 : ASCII_TC1
3 : ASCII_CSV
4 : BINARY_C2C_LE
5 : BINARY_TC3_LE
MEMSIZE Maximum size of the data logger file in bytes (Maximum value is 500 MB)
BASIC_SAMPLE_TIME Time interval in which is checked whether the values have changed
TIMESTAMP Time stamp at the beginning of every new logged line in the data logger
file
[FILEHEADER] Start tag of the log-file
COMMENT Comment
[SAMPLECONDITIONS] Start tag of the values which shall be logged chapter
NUMCONDITIONS Number of values which shall be logged
[MASTERSAVECONDITIONS] Start of the chapter for master save conditions.
See also How the logger mechanism works (see " Introduction " on page
189).
NUMMASTERSAVECONDITIONS Number of master save conditions which must be valid before the
"normal" save conditions are checked
[SAVECONDITIONS] Start of the chapter for save conditions.
See also How the logger mechanism works (see " Introduction " on page
189)
LOG_MECHANISM Log mechanism modes: