STW TC1 User Manual Download Page 252

Page: 252 / 374

7 Teleservice Application Framework

User Manual

252/374

7.3.12

Utils

Header file: "utils.h"

7.3.12.1 utils_create_directory

Function Description

sint32 utils_create_directory (const charn * const opcn_Path, const mode_t oun_Mode)

The function creates a directory, in case the directory does not already exist.

Information Flow

Input Information

Parameter

Range

Description

opcn_Path

pointer to the name of the directory we want to
create

ocn_Mode

mode_t

S_IRUSR, S_IWUSR, S_IXUSR,

S_IRGRP, S_IWGRP, S_IXGRP,

S_IROTH, S_IWOTH, S_IXOTH,

S_ISUID, S_ISGID, S_ISVTX

S_IRWXU is the bitwise OR of S_IRUSR,
S_IWUSR and S_IXUSR.

S_IRWXG is the bitwise OR of S_IRGRP,
S_IWGRP and S_IXGRP.

S_IRWXO is the bitwise OR of S_IROTH,
S_IWOTH and S_IXOTH.

Output Information

Return Value

Description

C_NO_ERR

Function executed without error

C_CONFIG

NULL pointer

C_NOACT

can not create the directory

Summary of Contents for TC1























































































































































































































































































































































































Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands

STW TC1, User Manual

Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands