STW TC1 User Manual Download Page 109

Page: 109 / 374

7 Teleservice Application Framework

User Manual

109/374

7.2.8

Signal daemon

Daemon location

Configuration file

/usr/local/bin/ysignald

/etc/init.d/ysignald.config

How to activate the configuration file of the signal daemon

Activate the configuration file of the signal daemon, so the signal daemon is started during the boot up
sequence automatically.

1. Rename the configuration file of the ysignald the following way:

# mv /etc/init.d/_ysignald.config /etc/init.d/ysignald.config

2. Reboot the system

# reboot

ysignald

The signal daemon signalizes the current status of the module over led signal.

NOTE:
The signal daemon can only be used, when a LED is available.

Summary of Contents for TC1























































































































































































































































































































































































Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands

STW TC1, User Manual

Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands