STW TC1, User Manual

Page: 276 / 374

8 Development Tools
User Manual 276/374
do_make_customer_buildroot
do_make_fitimage
do_make_customer_buildroot
The script creates the buildroot packages that can be shipped to the customer. All packages that are marked as
"closed_source" packages (see menuconfig) are added to the customer BR version, without the source code.
do_make_fitimage
The script creates a FIT image from the rootfs.ubi result file. This image is located in the result folder and can
be used to update the TC1 via the STW U-Boot update mechanism.
do_distclean
The script cleans the buildroot folder after a rootfs is build. The script deletes all files generated during the build
process.
do_busybox_menuconfig
The script opens the busybox menuconfig setup menue to change its configuration. This only works after the
rootfs has been built. The busybox package must have been unzipped into the output folder.
do_busybox_savedefconfig
The script saves the current busybox configuration to the target busybox defconfig file.
target_config
The script sets up the configuration files (target defconfig) and the target directory structure.
NOTE:
The current buildroot and busybox configuration will be overwritten by the target defconfig!
To store the menuconfig settings permanently, use 'do_savedefconfig'. After that the 'do_make_all'
script will use the updated configuration
WARNING:
Change this file only when the scripts are ported to a new target.