STW TC1 User Manual Download Page 267

Page: 267 / 374

7 Teleservice Application Framework

User Manual

267/374

7.3.12.28 utils_close_dir

Function Description

void utils_close_dir(void* const opv_DirHandle)

The function closes a directory handle.

Information Flow

Input Information

Parameter

Range

Description

opv_DirHandle

Directory handle

7.3.12.29 utils_read_dir

Function Description

sint32 utils_read_dir(void* const opv_DirHandle, const charn* const opcn_Match, charn*
const opcn_FileName)

The function returns the next file

opcn_FileName

that contains the string

opcn_Match

from the directory

opv_DirHandle.

Information Flow

Input Information

Parameter

Range

Description

opv_DirHandle

Directory handle

opcn_Match

Match pattern (NULL or "": all files)

Output Information

Return Value

Description

C_NO_ERR

Function executed without error, a file was found

C_NOACT

Failed to find file, no files found

C_RANGE

Directory handle or file name parameter is a NULL pointer

Summary of Contents for TC1























































































































































































































































































































































































Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands

STW TC1, User Manual

Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands