STW TC1 User Manual Download Page 92

Page: 92 / 374

7 Teleservice Application Framework

User Manual

92/374

Section: Supervising the data daemon

# The data daemon can be supervised by a watchdog (provided by the ysysd daemon).

# The time when the watchdog shall be triggered is set by "watchdog_interval".

# Min. interval is 0, that deactivates the watch dog, max. interval is 0x7FFFFFFF,
recommended min. 120s / max. interval is 1000s

# If no interval is set, the watchdog will be deactivated (set to 0).

watchdog_interval 120

# The system reboot path, the maximum path length is 255. After the time has elapsed
without triggering the watchdog,

# the ysysd kills the ydatad and executes the "CMDOnWatchdog" command.

# If no path is set, the default 'signal01.beep' will be set.

CMDOnWatchdog /sbin/reboot

Section: Variable lists path

# The data daemon creates temporary variable list files during operation in the following
path.

# If no path is set, the default path "/var/run/taf/Datapools/" will be always set by the
daemon.

# Max. path length 255

BaseFolderTmp /var/run/taf/Datapools/

Section: Data pools path

# The data daemon provides also the possibility to configure data pools automatically at
startup.

# In that case all data pools which shall be configured at startup must be placed into the
following path.

# If no path is set, default path "/opt/taf/Datapools/" will be always set by the daemon.

# Max. path length 255

BaseFolderStatic /opt/taf/Datapools/

Section: Set data pool configuration mode

# 1 / TRUE: Data pool configuration at startup (static data pools) + dynamic data pool
configuration

# 0 / FALSE: Only dynamic data pool configuration is possible

# If no value is set, default (FALSE) will be always set by the daemon.

StartUpConfiguration 1

Summary of Contents for TC1























































































































































































































































































































































































Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands

STW TC1, User Manual

Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands