STW TC1 User Manual Download Page 23

Page: 23 / 374

5 Hardware

User Manual

23/374

Hardware

Here is an overview provided about the technical components of the TC1.

5.1

Variants

Available variants of the TC1:

Variants

WiFi

Bluetooth

2G/3G

GNSS
(GPS/GLONASS)

TC1-WiFi

yes

TC1-WiFi+

yes

TC1-Mobile

yes

Details of variants:

Variants

Details description

TC1-WiFi

WLAN and Bluetooth with external antenna:

IEEE 802.11 2.4 GHz / 5.5 GHz (a,b,g,n), Bluetooth® 4.0 (2.1+EDR, BLE

– Power Class

1.5)

TC1-WiFi+

WLAN, Bluetooth and GNSS with two external antennas:

IEEE 802.11 2.4 GHz / 5.5 GHz (a,b,g,n), Bluetooth® 4.0 (2.1+EDR, BLE

– Power Class

1.5)

GPS/GLONASS

TC1-Mobile

Cellular networks and GNSS with two external antennas:

2G Quad-Band GSM (850/900/1800/1900 MHz)

3G Five Bands UMTS/HSPA+ (WCDMA/FDD) (850/800, 900, 1900 and 2100 MHz)

GPS/GLONASS

Summary of Contents for TC1























































































































































































































































































































































































Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands

STW TC1, User Manual

Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands