STW TC1 User Manual Download Page 253

Page: 253 / 374

7 Teleservice Application Framework

User Manual

253/374

7.3.12.2 utils_remove_directory

Function Description

sint32 utils_remove_directory (const charn * const

opcn_DirPath)

The function removes a directory, in case the directory exists.

Information Flow

Input Information

Parameter

Range

Description

opcn_DirPath

pointer to the name of the directory

Output Information

Return Value

Description

C_NO_ERR

Function executed without error. The directory was removed successfulyl (if
directory is incorrect nothing happen)

7.3.12.3 utils_file_exists

Function Description

sint32 utils_file_exists (const charn * const

opcn_FileName)

The function verifies if the file opcn_FileName exists in the current folder.

Information Flow

Input Information

Parameter

Range

Description

opcn_FileName

pointer to file name we expect to find

Output Information

Return Value

Description

The file exists

The file does not exist

Summary of Contents for TC1























































































































































































































































































































































































Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands

STW TC1, User Manual

Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands