STW TC1 User Manual Download Page 68

Page: 68 / 374

6 Software

User Manual

68/374

6.5

Memory handling

The memory system of the device includes (see also Technical Data (see "

Processor and System Memory

" on

page 27)):



RAM



NOR



NAND



EEPROM

Overview of the memory mapping.



Root file system image: Unsorted Block File System (UBIFS)



Kernel image: Includes the linux kernel



U-Boot: Bootloader which initializes and loads the linux kernel



U-Boot environment: U-Boot specific environment variables



Flattened device tree: Used by the U-Boot to identify the hardware



NAND Flash: Path for the user data



EEPROM: User area

Summary of Contents for TC1























































































































































































































































































































































































Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands

STW TC1, User Manual

Search results

Summary of Contents for TC1

Reviews:

Related manuals for TC1

Brands by name

Popular brands