ASTOFLO PLUS ECO Instructions for Use
7 Operating states
24
7.2 On mode
Control panel
1x
Action
Press the
“Standby” button
to switch the device from
Standby Mode
to
On Mode
.
Device
response
The
“Standby” LED
turns off.
The device performs a self-test. All segments of the
display
and all LEDs flash and the acoustic alarm signal
beeps once to indicate that the control unit is functioning
correctly.
The
“Start” LED
flashes and the display
indicates the
set temperature flashing for approximately 3 seconds.
After that the current temperature of the heating profile
(e.g. 25.1°C) is displayed.
If the current temperature is below 18°C the display
indicates
If the current temperature is above 48°C the display
indicates
2
1
7
3
7
7
7
1
3
6
5
7
4
2
8
