ASTOFLO PLUS ECO Instructions for Use
5 Symbols
14
5 Symbols
Symbols, used on the Control Panel
Alarm condition if the yellow LED is on
"Standby
” button: Changes between
Standby Mode
and
On Mode
. The
warmer is in
Standby Mode
if the blue LED is on.
"Start
” button: Switches to the
Heating Mode
. The warmer is
in
Heating Mode
if the green LED is on.
SET
"Set
” button: Changes the set temperature of the heating profile in 1.0° C
increments.
If the "Set
” button and "Test” button is pressed at the same time the
brightness of the display is changed (three steps).
"Test
” button: Starts safety tests
Temperature setting range is limited
Where applicable, these symbols appear at the appropriate location on the
warmer, on the packaging, on the identification plate, or in the accompanying
documentation.
Defibrillation-proof type CF applied part
in accordance with
IEC/EN 60601-1
IPX 1
Protected from drips under the specified operating conditions
in accordance to IEC 60529.
Refer to instructions for use! / Follow instructions for use!
Caution: Federal US law restricts this device to sale by or on order of a
physician.
General warning sign
Catalogue number
Serial number
Year of manufacture
Manufacturer
Prohibition: Do not cover heating profile
– risk of overheating!
