5 Symbols
ASTOFLO PLUS ECO Instructions for Use
15
Prohibition: Do not clamp the heating profile
– risk of damage and
possible overheating!
Prohibition: Do not disinfect the heating profile with Hypochlorite solution
– risk of damage and possible overheating!
Pay attention to the flow direction of the fluid to the patient - risk of fluid
overheating!
Symbol at the connector for potential equalization according IEC/EN
60601-1.
Electrical devices are valuable products and should not be thrown in
dustbin when they reach the end of their serviceable life.
The device is conform to the MDD 93/42/EEC dated 14
th
June 1993 for
medical devices. The notified Body DEKRA Certification GmbH (Reg. No.
0124) monitors the quality system of the manufacturer. The CE mark
applies only to the ASTOFLO PLUS ECO Warmer. Disposable parts (e.g.
infusion sets) suitable for use with this device have their own approvals.
75JA
MEDICAL
– GENERAL MEDICAL EQUIPMENT AS TO ELECTRICAL
SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN ACCORDANCE
WITH standards
ANSI/AAMI ES60601-1:2005/(R)2012 and A1:2012), C1:2009/(R)2012
and A2:2010/(R):2012
CAN/CSA-C22.2 No. 60601-1:2014.
Control No. 75JA
This symbol indicates additional information.
Indicates the temperature range within which the package must be stored
and handled.
Indicates the ambient humidity range within which the package must be
stored and handled.
Indicates the pressure range within which the package must be stored
and handled.
Indicates the upright position of the package.
The package must be kept in a dry environment.
The contents of the package are fragile and must therefore be handled
with care. Do not drop or throw.
Recyclable - Polystrene (acc. GB 18455-2001)
CB
Recyclable - Cardboard (acc. GB 18455-2001)
Acoustic alarm signal
No acoustic alarm signal
