7 Operating states
ASTOFLO PLUS ECO Instructions for Use
25
7.3 Heating mode
Control panel
Action
Press the
“Start” button
to switch the device from
On
Mode
to
Heating Mode
to start the heating of the heating
profile.
Device
response
“Start LED”
turns on.
A self-test is performed. During this test the excessive
temperature and cable break alarms are activated once to
check the function of the cut offs.
The temperature regulation is activated.
The display
shows the current temperature
(e.g. 37.8 °C) of the heating profile.
If the current temperature is below 18°C the display
indicates
If the current temperature is above 48°C the display
indicates
The device can be started 3 seconds after the mains plug is
connected to the socket.
By pressing the
“Start” button
to soon, the selftest alarm
can be triggered (the display indicates „E“). In this case
switch the warmer off and on using the
“Standby” button
and repeat the procedure.
4
3
7
7
7
4
2
1
3
6
5
7
4
2
8
