ASTOFLO PLUS ECO Instructions for Use
7 Operating states
26
7.4 Increasing/Decreasing the set temperature of the heating profile
Control panel
1x
Action
1. Press the
“Set” button
while the control unit is turned on
(On Mode)
or started
(Heating Mode)
.
2. While the display is flashing, you can select any set
temperature between 33.0°C and 43.0°C in 1°C increments
by repeatedly pressing the
“Set” button
. When the set
temperature reaches 43.0°C, the next press of the "Set
”
button
returns to 33.0°C.
Device
response
The set temperature is displayed and flashes for
approximately 3 seconds (e.g. 41.0°C).
After the selection has been made the display
will
continue to flash this set temperature for approximately 3
seconds then revert to current temperature.
After changing the set temperature the acoustic alarm
beeps once to confirm the new set temperature.
When the control unit is in
Heating Mode,
temperature
regulation is activated with the new set temperature.
The set temperature most recently used is retained in
memory even after power is turned off.
The set temperature can be checked at any time by
pressing the
“Set” button
.
During operation, the control panel shows the internal
temperature of the heating profile; this is not equal to the
temperature of the medium to be warmed. The ASTOFLO
PLUS ECO neither regulates nor monitors the current
temperature of the medium to be warmed.
6
6
6
7
6
1
3
6
5
7
4
2
8
