Appendix
112
9
Print queue <print queue name> cannot be
serviced by printer 0, <print server name>
(In print server mode) The print queue name
cannot be serviced. Make sure that print
queue volume is on the specified file server.
Print server <print server name> has no printer.
(In print server mode) The printer is not as-
signed to the print server <print server
name>. Using NWadmin, assign the printer,
and then restart the printer device.
Print sessions full
Cannot accept the print session.
Printer <printer name> has no queue.
(In print server mode) The print queue is not
assigned to the printer. Using NWadmin, as-
sign the print queue to the printer, and then
restart it.
pserver start. (NetWare)
(In print server mode) NetWare service has
started.
Required computer name (<Computer name>)
is duplicated name.
The same computer name is detected on the
network. The start job determines the compu-
ter name by adding it to the suffix (0,1....).
Configure a new computer name that is
unique.
Required file server (<file server name>) not
found.
Cannot find the required file server.
restarted.
LPD has started.
sap enable, saptype=<SAP type>, sap-
name=<SAP name>
The SAP function has started. The SAP (SAP
type and SAP name) packet is issued to adver-
tise the service on the NetWare server SAP ta-
ble.
session<community name> not defined.
The requested community name is not defined.
session_ipx<community name> not defined.
The requested community name is not defined.
Set context to <NDS context name>
A <NDS context name> has been set.
shutdown signal received. network service re-
booting...
Rebooting the network service.
smbd start. (NetBEUI)
An smbd (SMB (Server Message Block) serv-
ice) has started.
Snmp over ip is ready.
Communication over TCP/IP via SNMP is
available.
Snmp over ipx is ready.
Communication over IPX via SNMP is available.
snmpd start.
SNMP service has started.
started.
Direct print service has started.
The print server received error <error
number> during attempt to log in to the net-
work.Access to the network was denied.Verify
that the print server name and password are
correct.
Cannot log on to the file server. The print serv-
er is not registered or a password is specified.
Register the print server without specifying a
password.
Message
Causes and solutions
Summary of Contents for SD462
