Standard SD462 Operator'S Manual Download Page 275

Page: 275 / 558

Printing with Windows

On the

[

Start

]

menu, point to

[

Settings

]

, and then click

[

Printers

]

Click the icon of the printer you want to use. On the

[

File

]

menu, click

[

Prop-

erties

]

Click the

[

Details

]

tab, and then click

[

Add Port

]

Click

[

Network

]

, and then click

[

Browse

]

On the network tree, double-click the name of the computer used as the
print server.

The printers connected to the network are displayed.

Click the name of the printer you want to use, and then click

[

]

Click

[

]

Make sure the port name is displayed in the

[

Print to the following port

]

box,

and then click

[

]

Printing without a Print Server

You can use this printer as a network printer without connecting to a print server.
You can configure the following ports:

❖

SmartDeviceMonitor

You can print via TCP/IP, IPP, or NetBEUI using SmartDeviceMonitor.

Note

❒

Install SmartDeviceMonitor for Client from the supplied CD-ROM. For de-
tails about installation, see

Printer Reference

❒

For details about SmartDeviceMonitor for Client, see p.45 “Using Smart-
DeviceMonitor for Client”.

❖

Standard TCP/IP port

You can print via TCP/IP using a standard TCP/IP port.

Note

❒

A standard TCP/IP port can be used with Windows 2000/XP or Windows
Server 2003.

❖

LPR port

You can print via TCP/IP using an LPR port.

Note

❒

An LPR port can be used with Windows 2000/XP, Windows Server 2003,
or Windows NT 4.0.

Summary of Contents for SD462












































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SD462

Reviews:

Related manuals for SD462

Brands by name

Popular brands

Standard SD462, Operator'S Manual

Search results

Summary of Contents for SD462

Reviews:

Related manuals for SD462

Brands by name

Popular brands